科研项目（限10项）
1. 陕西省教育厅科学研究计划，23JK0606，《大型石化单螺杆压缩机的稳定性控制策略研究》，2023/01-2024/12，主持；
2. 横向《高端装备制造钛合金精密深孔加工工艺关键技术研究》，在研，主持；
3. 教育部产学合作协同育人项目，《智能制造背景下创新型人才培养的教学与探索》，2024/01-2025/12，主持；
4.国家自然科学基金，《空气-水两相射流冲蚀特性及机理的研究》，参与，结题；
横向：
5.《单螺杆压缩机轴系的非稳态水压悬浮机制及工作稳定性研究》，参与，结题；
6.《大型石化用单螺杆样机开发》，参与，结题；
7.《单螺杆压缩机窄缝喷液润滑特性研究》，参与，结题；
8.《多列高压往复压缩机及其管路系统关键技术研究与应用》，参与，结题。
代表性论文（限10项）
1. J. Xie, C. Y. Peng, W. S. Zhang, et al. Experimental and simulated investigation of lubrication characteristics of a water-lubricated bearing in a single-screw compressor. Applied Sciences, 2021, 11(21): 9920.
2.J. Xie, J. H. Feng, F. L. Liu, et al. Research on the Injected Effect by the Narrow-Slit Injection Orifice in Screw Compressors, Materials Science and Engineering Conference Series, 2017
3.彭程宇，谢佳，冯全科，等．两级单螺杆压缩机气体阻力矩变化特性研究．西安交通大学学报．2022，56(02)，82-90．
4. J. Xie, J. Li, K. Lian, et al. Research on Injected Effect and Heat-transfer Characteristics of Narrow-Slit Injection Orifice Used for the Screw Compressor. 23rd International Compressor Engineering Conference at Purdue, 2016.
5.J. Xie, B.Y. Du, X. L. Yu, et al. Design of Cryogenic Box System for Testing Characteristics of Compression Springs. 5th conference on compressors and refrigeration.
6.W. W. Wu, Jia Xie, J. Nie, et al. Experiment research of pressure fluctuations of the water-air jet impacting on solid surface. The 6th International Symposium on Fluid Machinery and Fluid Engineering.
7.F. L. Liu, J. Xie, Z. D, et al. Analysis on lubricant film force for two types of meshing pair profile in single screw compressor. 23rd International Compressor Engineering Conference at Purdue, 2016.
8.W. S. Zhang，J. Xie，et al. The application of active magnetic control system for piston centering in labyrinth piston compressor. 8th conference on compressors and refrigeration.
9.冯全科，谢佳，张文珊．单螺杆压缩机多舛命运转折与喷液悬浮啮合技术. 压缩机技术2016,06,6-10
